Toshiba Satellite M50 (PSM53) User Manual

Page 43

Advertising
background image

TOSHIBA M50

2-2

The Grand Tour

DC IN LED

The DC IN LED indicates the computer is
connected to the AC adapter and it is plugged into
an AC power source.

Power LED

In normal operating mode, the Power LED glows.
If the system is in Standby Mode the LED will
flashes, while the LED will be off when the
computer is turned off or is in Hibernation Mode.

Battery LED

The Battery LED indicates the battery's current
charge/discharge status. It lights blue when the
battery is fully charged. It lights amber while the
battery is being charged from the AC adapter. It
flashes amber when the battery capacity is low.

Hard Disk Drive LED

The Hard Disk Drive LED indicates that the hard
disk drive is being accessed. Every time your
computer runs a program, opens a file, or
performs some other function in which it must
access the hard disk drive, this light will go on.

Wireless
Communication
Switch

The wireless communication switch turns on the
wireless networking transceiver. The Wireless

Communication LED beside it indicates that
wireless networking is turned on.

(The availability of this function depends on the
model you purchased.)

Wireless
Communication LED

Indicates whether the wireless LAN is active or
not.

(The availability of this function depends on the
model you purchased.)

Infrared Port

This infrared port is compatible with Infrared Data
Association (IrDA) Fast InfraRed (FIR) standards.
It enables cableless 4 Mbps data transfer with
IrDA 1.1 compatible devices.

(The availability of this function depends on the
model you purchased.)

Headphone Jack

The headphone jack lets you connect stereo
headphones or other audio-output devices such
as external speakers. Connecting headphones or
other devices to this jack automatically disables
the internal speakers.

Microphone Jack

The standard 3.5 mm mini microphone jack
enables connection of a three conductive type
mini-jack for a monaural microphone.

Volume Control

Use this dial to adjust the volume of the stereo
speakers or headphones.

Advertising
This manual is related to the following products: