Toshiba Satellite 2670 - Manual (Page 85)

User's Manual Setup and Password Security 7-1
Version
1
Last Saved on 19/01/00 17:28
Satellite 2670/2710 User's Manual – 2670_UK.doc – ENGLISH – Printed on 19/01/00 as IM_267UK
Chapter 7
Setup and Password Security
This chapter explains how to use the TSETUP utility to configure your
computer in a MS-DOS environment and how to set security passwords.
When you configure the computer with TSETUP, the computer stores your
selected values in memory that is backed up by the internal battery
powered Real Time Clock (RTC).
If the RTC battery fully discharges, configuration data is lost. A checksum
error is displayed when you start the computer and the system
configuration returns to default values. To charge the RTC battery, connect
the AC adaptor and turn on the computer’s power. The RTC battery does
not charge when the computer is turned off.
TSETUP
TSETUP is an MS-DOS-based program that provides similar functions to
Hardware Setup and Power Saver Utility. Settings for the HDD Mode,
LCD Display Stretch explained in this chapter, cannot be made in
Hardware Setup. The SYSTEM SETUP screen is displayed when you
execute the file TSETUP.EXE, which is stored in the Windows subdirectory
on your hard disk.
If the supervisor password is set and you log onto the computer with the
user password, you cannot access the TSETUP program.