Executing tsetup, Changing values in the tsetup menu – Toshiba Satellite 2670 User Manual

Page 86

Advertising
background image

7-2 Setup and Password Security

User's Manual

Satellite 2670/2710 User's Manual – 2670_UK.doc – ENGLISH – Printed on 19/01/00 as IM_267UK

Executing TSETUP

1. Select Restart (the computer) in MS-DOS mode? from the

Shut

Down window.

2. After the computer reboots in MS-DOS, type TSETUP and press Enter.

TSETUP displays the SYSTEM SETUP screen.

The TSETUP screen is divided into two pages SYSTEM SETUP (1/2)
and SYSTEM SETUP (2/2).

MEMORY
Total = 65536 KB

BATTERY
Battery Save Mode = Full Power

PASSWORD
Not Registered

DISPLAY
Power On Display = Auto-Selected

LCD Display Stretch = Disabled

TV Config.

BOOT PRIORITY
Boot Priority = FDD

→HDD→CD-ROM

Power On Boot Select = Enabled

OTHERS
CPU Cache = Enabled

Level 2 Cache = Enabled

Processor Serial Number = Disabled

Auto Power On = Disabled

Alarm Volume = High

System Beep = Enabled

CD Power SW Mode = CD Play

PERIPHERAL
Pointing Devices = Auto-Selected

Ext Keyboard "Fn" = Disabled

USB Legacy Emulation = Disabled

Parallel Port Mode = ECP

Hard Disk Mode = Enhanced IDE (Normal)

SYSTEM SETUP (1/2) ACPI BIOS version = x.xx

CONFIGURATION
Device Config. = All Devices

I/O PORTS
Serial = COM1(3F8H/IRQ4)

Built-in Modem = COM2(2F8H)

Parallel = LPT1(378H/IRQ7/CH3)

FLOPPY DISK I/O
Floppy Disk = (3F2H/IRQ6/CH2)

DRIVES I/O
HDD = Primary IDE(1F0H/IRQ14)

CD-ROM = Secondary IDE(170H/IRQ15)

PCI BUS

PCI BUS = IRQ11

SYSTEM SETUP (2/2) ACPI BIOS version = x.xx

PC CARD
Controller Mode = Auto-Selected



: €Select items Space, BkSp: Change values PgDn, PgUp: Change pages

Esc: Exit without saving Home: Set default values End: Save changes and Exit

The system setup screen

Changing values in the TSETUP menu

1. Press

← and → to move between the two columns. Press ↑ and ↓ to

move between items in a column.

2. Press either the space bar or BkSp to change the value.

3. Press PgUp or PgDn to change pages.

On either page, you can go directly to a specific group by pressing the first
letter (highlighted) of the group’s name. For example, press
B to go to the
Battery

group.

Advertising
This manual is related to the following products: