Toshiba Qosmio G50 - Manual (Page 208)

10-24 User’s Manual
Qosmio G50
HDMI monitor output function
i.LINK (IEEE1394) device
Problem Procedure
No display Try adjusting the contrast and brightness controls
on the television.
Press the FN + F5 hot key in order to change the
display priority and ensure that it is not set for the
internal display panel only.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
If you turn the computer off into Sleep Mode while the display is on HDMI
monitor, the computer will select either the internal LCD or an external
computer CRT as the display device the next time is turned on.
Problem Procedure
i.LINK device does
not function Make sure the cable is securely connected to the
computer and to the device.
Make sure the device’s power is turned on.
Reinstall the drivers. Open the Windows
Control Panel and double-click the Add
Hardware icon. Follow the on-screen
directions.
Restart Windows.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.