Opening the display, Turning on the power, Opening the display -6 turning on the power -6 – Toshiba Equium A100 (PSAA4) User Manual

Page 52

Advertising
background image

User’s Manual

3-6

Getting Started

Opening the display

The display panel can be rotated in a wide range of angles for optimal

viewing.
1. Slide the display latch on the front of the computer to the right to unlatch

the display panel.

2. Lift the panel up and adjust it to the best viewing angle for you.

Opening the display panel

Turning on the power

This section describes how to turn on the power.

1. Open the display panel.
2. Press and hold the computer’s power button for two or three seconds.

Turning on the power

When you open the display, hold it with both hands and lift up slowly.

Display latch

After you turn on the power for the first time, do not turn it off until you have

set up the operating system (OS) and the OS has started up.
If the external diskette drive is connected, make sure it is empty. If a

diskette is in the drive, press the eject button and remove the diskette.

Power Button

Advertising
This manual is related to the following products: