System on cdp charge – Toshiba Tecra A50-A User Manual

Page 118

Advertising
background image

Always use the USB cable that was included with your USB device.
Enable under Battery Mode
This option can be used to enable/disable sleep and charge under battery
mode. It also displays the remaining battery capacity.
Move the slider to enable or disable this function.

Enabled

Enables Sleep and Charge function under battery
mode.

Disabled

Enables Sleep and Charge function only when
the AC adaptor is connected.

Lower limit of
remaining battery life

Specifies the lower limit of remaining battery life
by moving the slider bar. If the remaining battery
life falls below the setting, the Sleep and Charge
function will be stopped.
This setting is only available when the Enable
under Battery Mode
is enabled.

System ON CDP Charge

This function enable/disable CDP (Charging Downstream Port) to use rapid
USB charge while the computer is powered on. When "System ON CDP
Charge Mode" is enabled, your computer can supply USB bus power
(DC5V, 1.5A) to the compatible ports while the computer is turned on.
To set System ON CDP Charge Mode, click Start -> All Programs ->
TOSHIBA -> Tools & Utilities -> HWSetup -> USB -> System ON CDP
Charge Mode
.

Enabled

Rapid USB battery charge at maximum 1.5A
while PC is powered On.

Disabled

Conventional USB battery charge while PC is
powered On.

The "System ON CDP Charge Mode" may not work with certain external
devices even if they are compliant with the USB specifications. In those
cases, use a USB port without "USB Sleep and Charge function" or disable
“System ON CDP Charge Mode”.
It is recommended that AC adaptor be connected to the computer while
supplying USB bus power (DC5V, 1.5A).
When your computer battery capacity is too low to continue, "System ON
CDP Charge Mode" may not work. In those cases, connect the AC adaptor
and reboot the computer.
Always use the USB cable that was included with your USB device.
When "System ON CDP Charge Mode" or “USB Sleep and Charge
function” is enabled, the “USB Wakeup” function may not work. In that

User's Manual

5-9

Advertising
This manual is related to the following products: