Chapter 3: getting started, Installing the battery pack, Chapter 3 – Toshiba Satellite Pro P300 User Manual

Page 55: Getting started, Installing the battery pack -1, Provi

Advertising
background image

User’s Manual

3-1

Getting Started

Chapter 3

Getting Started

This chapter provides basic information to get you started using your

computer. It covers the following topics:

Installing the battery pack

Connecting the AC adaptor

Opening the display

Turning on the power

Windows Vista™ setup

Turning off the power

Restarting the computer

System Recovery Options

Restoring the preinstalled Software

Installing the battery pack

To install a battery, follow the steps below.

1. Turn the computer's power off.
2. Disconnect all cables connected to the computer.
3. Insert the battery pack. The Battery Release Latch clicks into place.

Be sure also to read the Instruction Manual for Safety and Comfort. This

guide, which is included with the computer, explains product liability.

All users should be sure to read the section Windows Vista setup.

The battery pack is a lithium ion battery, which can explode if not

properly replaced, used, handled or disposed of. Dispose of the battery

as required by local ordinances or regulations. Use only batteries

recommended by TOSHIBA as replacements.

Do not touch the latch while holding the computer. Or you may get

injured by the dropped battery by unintentional release of the latch.

Please do not push the power button before installing the battery pack.

Advertising
This manual is related to the following products: