Toshiba Satellite Pro M40 - Manual (Page 153)

User’s Manual 9-17
Troubleshooting
Standby/Hibernation
LAN
Character display
becomes garbled
during a communication
In data transmission, make sure the parity bit and
stop bit settings correspond with those of the
remote computer.
Check the flow control and communication
protocol.
You cannot receive an
incoming call
Check the rings before auto answer setting in an
incoming call your communications application.
You can also use the ATS0 command.
If problems persist, contact your dealer.
Problem Procedure
Problem Procedure
The system will not
enter Standby/
Hibernation
Is Windows Media™ Player open?
The system might not enter Standby/Hibernation,
if Windows Media Player is either playing a
selection or finished playing a selection.
Close Windows Media Player before you select
Standby/Hibernation.
If problems persist, contact your dealer.
Problem Procedure
Cannot access LAN Check for a firm cable connection between
the LAN jack and the LAN HUB.
Wake-up on LAN Make sure the AC adaptor is connected.
The does not work Wake-up on LAN function
consumes power even when the system is off.
If problems persist, consult your LAN
administrator.