Toshiba Satellite Pro M40 - Manual (Page 161)

User’s Manual C-1
Appendix C
Internal Modem Guide
This appendix describes how to install and the remove the internal modem.
Installing the modem board
To install the modem board, follow the steps below.
1. Save your data, quit Windows and turn off the power.
2. Disconnect the AC adaptor and any other peripheral devices.
3. Turn the computer upside down and remove the battery pack.
4. Remove one screw securing the modem cover and remove the cover.
5. Remove two screws, which you use later to secure the modem board.
6. Seat the modem board.
7. Connect the modem board cable.
8. Secure the modem board with two screws removed in step 5.
9. Seat the modem board cover and secure it with one screw.
10. Install the battery pack.
Do not disassemble the computer beyond the steps described in this
instruction or touch any components not specifically described.
The internal modem is preinstalled. The following is for information only.