Dvd menu options, Eng lis h, Down sampling – Toshiba SD2010 User Manual

Page 23: 3d effects, Using the rating setup menu, Rating level settings, Changing the password

Advertising
background image



E

ng

lis

h

mode.

B

Use  /  to select a setting and press OK to

confirm.

Down Sampling

You can enable and disable the digital signal for

better sound output quality.

A

In 'Audio', press  /  to select {

Down

Sampling }, then press .

{

Off }

If your amplifier / decoder is compatible with 96 KHz

PCM, select “ Off “ . Sound is sampled at 96 KHz.

{

On }

If your amplifier / decoder is not compatible with 96

KHz PCM, select “ On “ . Sound recorded at 96 KHz

is down sampled to 48 KHz.

B

Use  /  to select a setting and press OK to

confirm.

Tip:

- When playing back disc with copyright protection,

the sound will be down sampled to 48 KHz even

when you select Down Sampling off.

3D Effects

To obtain expansive virtual surround sound effects

from two speakers, set 3D Effects to on. This

enhancement sounds only output from the Analogue

AUDIO OUT (L / R) jacks of the DVD player.

A

In 'Audio', press  /  to select { 3D Effects }, then

press .You can set to { Off } or { On }.

B

Use  /  to select a setting and press OK to

confirm.

Tip:

- Only effective in playback of a DVD Video disc with

Dolby Digital 5.1 bitstream.

Using the Rating setup menu

A

Press SETUP on the remote control.

The system setup menu appears.

Parental control : 8.Adult

Set Password

Language

Video

Audio

Misc

Rating

B

Press  /  to select {

Rating }, then press .

C

Press  /  to select an item, then press  to

access.

Example: { Parental control }

The options for the selected item appears.

If the selection in the menu is greyed out, that

means the feature is not available or not possible to

change at the current state.

D

Use  /  to select a setting and press OK to

confirm.

Example: {

8. Adult }

The setting is selected and setup is completed.

E

To exit, press SETUP.

Rating Level settings

Depending on the DVD, you may be asked to

change the parental level while playing the disc. The

rating levels are from 1 to 8 and are country

DVD Menu Options

dependent. You can prohibit the playing of certain

discs that are not suitable for your children, or have

certain discs played with alternative scenes.

A

In ' Rating ', press  /  to select {

Parental control },

then press .

B

Use the number buttons to enter the four-digit

password, then press OK.(See ‘Changing the

Password’ on this page.)

C

Press

OK again to list the parental level.

{

1.Kid Safe }

Suitable for children.

{

2. G }

General Audience; recommended as acceptable for

viewers of all ages.

{

3. PG }

Parental Guidance suggested.

{

4. PG-13 }

Unsuitable for children under 13.

{

5. PG-R }

Parental Guidance Recommended.

{

6. R }

Restricted; under 17 requires accompanying parent

or adult guardian.

{

7. NC-17 }

No one under 17 admitted.

{ 8. Adult }

DVD softwares of any grades (adult/general/children)

can be played back. Should be viewed only by adults

due to graphic sexual material, violence or language.

D

Use  /  to select a rating level and press OK to

confirm.

Select {

8.Adult } to disable parental level and

allow all discs to play.

DVDs that are rated higher than the level you

selected will not play unless you enter your four-digit

password.

Tips:

-This feature will not limit viewing if the disc

manufacturer did not code the disc.

-VCD, SVCD, CD have no level indication, so

parental control has no effect on these type of discs.

This also applies to most illegal DVDs.

-Some DVDs are not coded with a rating though the

movie rating may be printed on the disc cover. The

rating level feature does not prohibit play of such

discs.

Changing the Password

You need to enter your four-digit password to play a

prohibited disc or if prompted for a password.

A

In 'Rating', press  /  to select {

Set Password },

then press OK.

You will be prompted to enter your four-digit

password.

Enter Password

B

Use the number buttons

( 0-9 ) to enter the four-digit

password, then press OK.

When doing this for the first time, enter the default

password '0000 '.

If you forget your old four-digit password, enter the

default password ' 0000'.

C

Press OK again to enter the new four-digit password.

The new four-digit password will now take effect.

Enter New Password

Helpful hint: Press  to go back to previous menu item.

Press SETUP to exit the menu item.

Advertising