Power-up modes, Power-up modes -11, Windows utilities – Toshiba NB200 User Manual
Page 88
User’s Manual
6-11
Power and Power-up Modes
To install a battery, follow the steps as detailed below:
1. Insert the battery pack as far as it will go into the computer (1).
2. Ensure that the battery pack is securely in place and the battery safety
lock (2) is in its position.
Securing the battery pack
3. Turn your computer over.
Power-up modes
The computer has three power-up modes:
■
Boot: Computer shuts down without saving data. Always save your
work before you turn the computer off in boot mode.
■
Hibernation: Data in memory is saved to the hard disk.
■
Sleep: Data is maintained in the computer’s main memory.
Windows utilities
You can configure various settings associated with both Sleep Mode and
Hibernation Mode within the Power Options. To access it, Start Control
Panel System and Security Power Options.
1. Battery Pack
2. Battery safety lock
1
4
5
2
1
Refer also to the section Turning off the power in Chapter 3,
.