Hard disk drive pack, Hard disk drive pack -5, Removing the hdd pack -5 – Toshiba Tecra 8100 User Manual
Page 127: Removing the hdd pack
User's Manual
Optional Devices 8-5
Version
1
Last Saved on 10/12/99 02:16
Tecra 8100 User's Manual – 8100_UK.DOC – ENGLISH – Printed on 13/12/99 as IM8100UK
Hard disk drive pack
An extra HDD expands the flexibility of your system and lets you carry
your data without carrying the computer.
Removing the HDD pack
To remove the HDD pack, follow the steps below and refer to the following
illustration.
1.
Set the computer to boot mode and turn off the power.
2.
Disconnect the AC adaptor and all external cables connected to the
computer.
3.
Remove the main battery and optional secondary battery.
4.
Turn the computer upside down remove the HDD cover.
5.
Two small rows of ridges mark two latches securing the cover. Press
on these ridges until you hear a click.
6.
Press on the arrows and lift the cover up and out to remove it.
Removing the HDD slot cover