Ant/cable (if available), En glis h – Toshiba SL980 User Manual

Page 18

Advertising
background image

18

SETTING UP YOUR TV

En

glis

h

o

Press OK. If your country supports Network Guide,
The Guide Type screen will appear.

Press

C

or

c

to select Broadcast Guide or

MediaGuide.

NOTE: If you select MediaGuide, it may take time to
access the Guide screen depending on active channel
numbers.

p

Press OK. If the Ant/Cable screen appears, press

B

or

b

to select Antenna or Cable, and then press OK to

check (

).

q

Select Next and press OK. The Auto Tuning start up
screen will appear with the option to select between
DTV and ATV, DTV or ATV if available. Use

C

or

c

to

select the appropriate mode.

r

Press

B

or

b

to highlight Start Scan, and then press

OK.

The television will start to search for available DTV
and/or ATV channels. The progress bar will indicate
the scan status.

You must allow the television to complete the
search.

When the search is complete, the television will
automatically select channel one.

The Auto Tuning screen will display the total number
of services found.

s

Press

C

or

c

to view the DTV (digital channel) or ATV

(analogue channel) lists.

T

Use

B

or

b

to move through the list to select a

channel, and then press OK to view.

In ATV mode, some areas may receive duplicate
stations. There may not be a clear picture or the signal
may be weak, so the station order can be changed
using ATV Manual Tuning.

REMEMBER: Press TV at any time to select between
ATV and DTV modes.

NOTE: The time will be set automatically by
transmission but can be advanced or decreased by
using Local Time Setting in the DTV Settings screen.

From this menu, you can set the RF input configuration.

a

Press MENU /

C

c

to highlight Setup icon.

b

Press

B

/

C

c

to highlight System Setup icon and

press OK.

c

Press

b

to select Ant/Cable and press

C

or

c

to

select Antenna or Cable.

NOTE: When you attempt to change the Ant/Cable
setting, a warning message will appear followed by
PIN entry (if PIN has been set) and a prompt for Auto
Tuning
.

d

When Ant/Cable is set to Cable, the following setting
options will be provided in the Auto Tuning screen.

Press

B

or

b

to select an item and press

C

or

c

to

select your desired option.

TV Guide Selection

Broadcast Guide

Electronic Program Guide accessed by the “GUIDE” key of your
remote control:

Select “MediaGuide” if you want to use the advanced rich media
EPG provided through the network.

*Your TV must be connected to the network.

Select “Broadcast Guide” if you want to use the simple EPG
provided by our local broadcast network, if any.

Ant/Cable

Cable

Next

Antenna

Auto Tuning - Antenna

Progress

Found

ATV Tune

Waiting...

: C7

Channel

DTV Tune

3 %

2

Ant/Cable (if available)

PLEASE NOTE

The Quick Setup menu can also be accessed at any
time from the Setup / System Setup menu.

Auto Tuning - Cable

DTV and ATV

Tuning Mode

DTV

Others

Operator Selection

Quick Scan

Scan Type

Auto

Start Frequency

Auto

End Frequency

Auto

Modulation

Auto

Symbol Rate

Auto

Network ID

Start Scan

Advertising