Toshiba SL980 - Manual (Page 9)

9
Engl
ish
CONNECTING YOUR TV
Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch,
remove the mains plug from the wall socket.
Aerial cables:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the aerial to the socket on the rear of the television.
If you use a decoder and/or a media recorder, it is essential
that the aerial cable is connected through the decoder and/or
through the media recorder to the television.
SCART leads: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the media recorder IN/OUT socket to the television.
Connect the decoder TV socket to the television.
Before running Auto Tuning, put your decoder and media
recorder to Standby.
The RCA sockets alongside the COMPONENT VIDEO INPUT
sockets will accept L and R audio signals.
When connecting the VIDEO/AUDIO devices, connect those
cables to Y/L/R sockets.
The Digital Audio Output socket enables the connection of a
suitable surround sound system.
NOTE: This output is always active.
HDMI® (High-Definition Multimedia Interface) is for use with
electrical equipment with digital audio and video output. It is
designed for best performance with 1080i and 1080p high-
definition video signals but will also accept and display VGA,
480i, 480p, 576i, 576p and 720p signals.
PC format signals will also be displayed.
NOTE: Although this television is able to connect to HDMI
equipment, it is possible that some equipment may not
operate correctly.
LAN port is used to connect the TV to your home network.
This TV can play digital content stored on a DLNA CERTIFIED™
product with server function.
A wide variety of external equipment can be connected to
the back of the television; therefore, the relevant owner’s
manuals for all additional equipment must be referred to
for exact instructions.
If the television automatically switches over to monitor
external equipment, return to normal television by pressing
the desired programme position button. To recall external
equipment, press
o
to select between TV, EXT 1, EXT 2,
HDMI 1, HDMI 2, HDMI 3 or PC.
When the external input mode is selected while viewing DTV
mode, the SCART socket does not output video/audio signals.
LAN port
SCART (EXT 1)
DIGITAL AUDIO OUTPUT
(OPTICAL)
HDMI 3 INPUT
HEADPHONE jack
HDMI 1/2 INPUTS
COMPONENT VIDEO/AUDIO INPUT
VIDEO/AUDIO INPUT (Y/L/R)
(EXT 2)
RGB/PC INPUT
USB 1 port
Media Player/USB HDD connection port
Media Recorder
Aerial Cable
Power cord
ILLUSTRATION SHOWS 40RL938.