Toshiba Qosmio X300 - Manual (Page 156)

User’s Manual 8-18
Optional Devices
Select HD Format
To select the display mode, follow the steps as detailed below:
1. Click Start and click Control Panel.
2. Click Appearance and Personalization.
3. Click Personalization.
4. Click Display Settings.
5. Click Advanced Settings.
6. Click List All Modes.
7. Select the one of the below selection at "List All Modes".
REGZA Link (PC Control)
HDMI out port can connect with Type A connector HDMI cable.
One HDMI cable can send and receive video, audio and control
signals.HDMI-CEC (Consumer Electronics Control) is a standard in the CE
Industry which allows devices to work together over an HDMI cable.
By connecting a TV player which supports HDMI Control to this port, the
remote control for the connected TV can be used to operate some of the
computer functions.
Using REGZA Link (PC Control)
Toshiba notebooks with REGZA Link include a Toshiba utility dedicated to
take advantage of its capabilities which can allow you to:
■ Use the TV remote control to output the computer screen onto the TV
screen.
■ Use the TV remote control to launch, operate and close applications on
your computer.
■ Turn on the TV when the HDMI output is selected using the Fn + F5
key.
■ Switch the video output (HDMI or LCD) when executing certain desktop
icons.
Display mode at "List All Modes"
HD Format
1920 by 1080, True Color (32bit), 60Herts
1080p
1920 by 1080, True Color (32bit), 30Herts (Interlaced) 1080i
1280 by 720, True Color (32bit), 60Herts
720p
720 by 576, True Color (32bit), 50Herts
576p
720 by 480, True Color (32bit), 60Herts
480p
The above display mode is a typical HDMI display mode. The selectable
display modes will vary for different HDMI monitors.
Some models are supported with the REGZA Link.