Toshiba SDP94D - Manual (Page 50)

50
TV vie
wing
Channel search options
Redo channel search in the following procedures
whenever you need.
1 In TV/SD-V mode, press MENU.
2 Press / to select “Installation”, then
press ENTER.
3 Confirm “Area Search” is selected, press
ENTER.
Channel search starts.
To cancel the process, press RETURN.
4 Press MENU repeatedly until the menus
disappears.
Searching a specific channel
If you know the frequency of a channel you need,
you can save the searching time by specifying the
frequency.
1) Perform steps 1 to 2.
2) Press / to select “Manual Search” or “Auto
Search”, then press ENTER.
Manual Search: To specify the frequency.
Auto Search:
To specify the frequency range.
3) Set the channel data.
Auto Search
Start Freq(KHz)
7M BandWidth
4 74000
End Freq(KHz) 474000
Manual Search
Freq(KHz)
7M BandWidth
4 74000
e.g.
4) Press ENTER.
Channel search starts.
When complete, “Installation” menu returns.
Operation (continued)
SDP94DTWB_E_01-56.indd 50 SDP94DTWB_E_01-56.indd 50 2010/06/08 16:17:01 2010/06/08 16:17:01