Toshiba Gigashot K Series - Manual (Page 99)

Owner’s Manual 75
Hard Disk Camera GSC-K80HE/GSC-K40HE
Protecting Images
To prevent images from being inadvertently erased, you can make them
read-only files. Images with this status are referred to as “protected”
images.
Selecting and Protecting Images
1. From the play menu, use the jog dial to select [PROTECT] and press
the OK button.
2. Use the jog dial to select the image to be protected and press the OK
button.
3. Move the OK button to to select [OK] and press the OK button.
The images are protected and the play menu reappears.
If you do not want to protect the images, select [CANCEL] and press
the OK button.
Confirming Images in Enlarged View
In step 2, slide the zoom lever towards T.
Sliding towards W in enlarged view will return to the protection settings
screen.
ATTENTION
„
Formatting erases all your images, including protected images.
Erased images cannot be restored.
The [ ] icon appears below the
protected image.
To remove the protection, press the OK
button again.
To protect multiple images, repeat this
procedure. To move to the previous or
next album, move the OK button to
or respectively.
PLAY MENU
EXIT
COPY
PROTECT
PictBridge
ERASE
AUTO PLAY
PROTECT PROTECT
103-0009 103-0009
SELECT ALL SELECT ALL CLEAR ALL CLEAR ALL
NEXT ALBUM NEXT ALBUM
CANCEL CANCEL OK OK
SELECT