Toshiba BDX2100 - Manual (Page 10)

10
E
ng
lis
h
4 Preparation
Always.follow.the.instructions.in.this.chapter.
in sequence.
Note:
- Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Prepare the remote control
1.Open.the.battery.compartment.
2.Insert.two.R03.batteries.with.correct.
polarity.(+/-).as.indicated.
3.Close.the.battery.compartment.
Notes:
- If you are not going to use the remote control
for a long time, remove the batteries.
- Do not use old and new or different types of
batteries in combination.
- Risk of explosion! Keep batteries away from
heat, sunshine or fire. Never discard batteries in
fire.
• The maximum operable ranges from
the unit are as follows.
-.Line.of.sight:.approx..9.m
-.Either.side.of.the.centre:.approx..7.m..
within.30°
-.Above:.approx..7.m.within.30°
-.Below:.approx..7.m.within.30°
USB
7 m 9 m 7 m
Setting up the player
Find the correct viewing channel
1.Press.
1
to.turn.on.this.product.
2.Turn.on.the.TV.and.switch.to.the.correct.
video-in.channel.(refer.to.the.TV.user.
manual.on.how.to.select.the.correct.
channel)
Use the SETUP menu
1.Press. SETUP to. display. the. Setup. menu.
when. the. BD. Player. is. playing. or. no. disc..
And.press.SETUP to.exit.the.Setup.menu.
Select menu display language
1
.
Press.SETUP
[General Setting] menu.is.displayed
2.Select.[Language], then.press 
3.Select.[OSD], then.press .
....-.The.language.options.may.vary.for.
different.regions.
4.Press / to select a language, then
press OK
Note:
- If this disc player is connected to a HDMI CEC
compliant TV, skip this setting. It switches
automatically to the same OSD menu language
as per your TV setting.