Toshiba BDX2100 - Manual (Page 23)


E
ng
lis
h
POWER
Cannot.play.back.a.disc. Make.sure.that.the.BD.Player.supports.the.disc.
Make.sure.that.the.Blu-ray.Disc.player.supports.the.region.code.
of.the.DVD.or.BD.
For DVD+RW/+R or DVD-RW/-R, make sure that the disc is
finalized.
Clean.the.disc.
Cannot.play.back.JPEG.
files from a disc.
Make sure that the disc was recorded in the UDF, ISO9660 or
JOLIET.format.
Cannot play MP3 files
from.a.disc.
Make sure that the disc was recorded in the UDF, ISO9660 or
JOLIET.format.
Make sure that the bit rate of the MP3 files is between 112 and
320.kbps.
Make sure that the sample rate of the MP3 files is 32kHz,
44.1kHz.or.48kHz.
Cannot find a JPEG file. Make.sure.that.the.selected.group.(folder).does.not.contain.
more than 9,999 files for DVD, and 999 files for CD.
Make sure that the file extension is .jpg, .JPG, .jpeg or .JPEG.
Cannot find a MP3 file. Make.sure.that.the.selected.folder.does.not.contain.more.than.
9,999 files for DVD, and 999 files for CD.
Make sure that the file extension is .mp3 or .MP3.
.Cannot.upgrade.SW When you upgrade the system with USB Flash device, you
should make a new folder named upg/UPG_ALL, and copy the
upgrade file into this folder.
The.USB.Flash.Device.
Cannot.be.played
Use.USB.Flash.Device.corresponding.to.the.Mass.Storage.
Class.Driver.
Sometimes.the.options..
of.setup.menu.cannot.
be.selected.
When playing a DVD disc or BD disc, press STOP button
once, the player will go into stop resume mode, meanwhile
you.cannot.change.some.settings.in.setup.menu.such.as.
language subitem menu, audio, subtitle etc.
If you want to change that, press STOP button twice, the
player will go into full stop mode, then you can do it.