Ant/cable/satellite (if available) – Toshiba TL969 User Manual

Page 20

Advertising
background image

20

SETTING UP YOUR TV

En

glis

h

v

If your satellite dish is movable, the following
Positioning screen will appear.

Press

B

or

b

to highlight Positioning, and then press

C

or

c

to find the dish position with the strongest

signal level.

Press

B

or

b

to highlight Store Position and press

OK to store the dish position. Repeat steps 21 and 22
for the next satellite as necessary.

If your satellite dish is not movable, the Positioning
screen will not appear.

Adjust the dish position manually for the maximum
Signal Level strength. The signal level strength is
displayed from 0% to 100%. A high signal level can be
achieved by adjusting the satellite dish the best way
possible.

Highlight Done and press OK.

w

If the reception testing completes successfully, the
Auto Tuning startup screen will display.

You can select Search Option from Free to Air and
All.

When choosing the search option All, all channels
(including encrypted ones) of the satellite will be
searched for. If you wish to only search for
unencrypted (free) channels, please select Free to
Air
. In this case, the channel scan will be completed
faster.

x

Press

B

or

b

to highlight Start Scan, and then press

OK.

The television will start to search for available DVB-S
channels. The progress bar will indicate the scan
status.

When the search is complete, the Auto Tuning results
screen will display the total number of services found.

y

Use

B

or

b

to move through the list to select a

channel, and then press OK to view.

From this menu, you can set the RF input configuration.

a

Press MENU /

C

c

to highlight Setup icon.

b

Press

B

/

C c

to highlight System Setup icon and

press OK.

c

Press

b

to select Ant/Cable/Satellite and press

C

or

c

to select Antenna, Cable or Satellite.

NOTE: When you attempt to change the Ant/Cable/
Satellite
setting, a warning message will appear
followed by PIN entry (if PIN has been set) and a
prompt for Auto Tuning.

Positioning

Signal Level

30%

Go to Stored Position

Store Position

Transponder

1/83 (10743 MHz H)

Positioning

W

E

Go to 0

Satellite : ASTRA 19.2°E

Step Size

1

Signal Level

30%

Auto Tuning - Satellite

Start Scan

Satellite

Free to Air

ASTRA 19.2°E

Search Option

PLEASE NOTE

The Quick Setup menu can also be accessed at any
time from the SETUP menu.

Ant/Cable/Satellite (if available)

Advertising