Channels (satellite), Standby channel update, Location setting – Toshiba TL969 User Manual
Page 28: Analogue switch-off, En glis h
28
SETTING UP YOUR TV
En
glis
h
Move
— Press the GREEN button to activate the
Move feature. Press the
B
or
b
buttons to select the
channel you wish to move and press OK to check.
If you wish to move multiple channels at once, select
another channel and check in the same way. Repeat
as necessary.
Once all desired channels have been checked, press
the
B
or
b
buttons to place the focus at the position
to which you wish to move the channels. The
channels will be inserted above the highlighted
channel. Press the GREEN button to execute the
move.
Position No. Sort
— Press the YELLOW button. A
confirmation window will appear. Press
C
or
c
to
select Yes and press OK.
a
Select DTV Settings from the System Setup menu
and press OK.
b
Select Channels and press OK.
The satellite channel list will appear.
c
For your convenience, you can edit and sort your
channel list.
Line Number Jump
— Press the number buttons
(0-9) to input the line number you want to select and
press OK.
Satellite Jump
— Press
Z
or
z
to jump to the
next channel on a different Satellite.
Renumber
— Same as Antenna/Cable channels.
Move
— Same as Antenna/Cable channels. See
Position No. Sort
— Press the YELLOW button. A
confirmation window will appear. Press
C
or
c
to
select Yes and press OK.
If the Standby Channel Update is set to On, when the TV is in
standby mode, Digital Tuning is automatically executed.
a
Select DTV Settings from the System Setup menu
and press OK.
b
Press
b
to select Standby Channel Update and
press
C
or
c
to select On.
You can select either Home or Store mode. Home is
recommended for normal home use. Select Store when using
the television for displaying in a shop, etc.
a
Select Location from the System Setup menu.
b
Press
C
or
c
to select Home or Store.
This is a digital television which is integrated to allow the use
of both digital and analogue services. However, during the
lifetime of this set it is very likely that analogue services will
be switched off to allow for more new digital services.
This ‘switch-off’ will happen in a number of phases, which will
be advertised in your area well in advance. It is recommended
that at each phase the television is re-tuned to ensure that
existing and new digital services can be viewed without
disruption.
Channels (Satellite)
Channels
Antenna TV
1
ABC ONE
2
ABC TWO
Pos.
Name
7
ABC THREE
30
CABC Channel
40
ABC NEWS 24
51
ABCi
822
AA
823
AC
Line No.
1/10
Your existing channel order will be lost. Do you
wish to continue?
Yes
Channels
Line No. 3/20
Satellite TV
1
DDD
19.2°E
Pos.
Name
Satellite
822
AA
823
AC
2
AB
3
E
801
BBC
802
BB
803
BA
25.6°E
25.6°E
19.2°E
19.2°E
22.5°E
22.5°E
22.5°E
Standby Channel Update
Location setting
Analogue switch-off