Toshiba BDX2000 - Manual (Page 26)

26 EN
PLAYBACK
There are 2 options for “BD Audio Mode” setting; either by
setting the output to the secondary and interactive audio
accompanied by the primary audio or by setting only the
primary audio. (Refer to pages 33-34 for more
information.)
1 In stop mode, press [MODE] repeatedly until
appears .
2 Use [K / L] to change the setting.
“Mix Audio Output”:
If it is available, BD-video’s secondary and interactive
audio will be output with the primary audio.
• The secondary audio is the audio for the secondary
video (Director’s commentary, etc.) and the interactive
audio is the audio for the interactive application
(Button click sounds etc.).
“HD Audio Output”:
Only the primary audio will be output. Set this mode in
order to output , Dolby Digital Plus, Dolby TrueHD, or
DTS-HD audio of BD through HDMI connection.
3 Press [RETURN] to exit.
Note
• The secondary audio will not be output when the
secondary video is not displayed or when “BD Audio
Mode” is set to “HD Audio Output”. (For some BDs,
secondary audio will be output even when
secondary video is off.)
• The sound mode cannot be changed during
playback of discs not recorded in multiple audio.
• Some discs allow changing the audio language
setting on the disc menu. (Operation varies
depending on the discs. Refer to the manual
accompanying the disc.)
• [AUDIO] may not work on some discs with multiple
audio streams or channels (e.g. DVDs that allow
changing audio setting on the disc menu).
• If you select a language that has a 3-letter-language
code, the code will be displayed every time you
change the audio language setting. If you select any
other languages, “---” will be displayed instead.
(Refer to page 40.)
• Audio Language selection cannot be made during
rapid playback. (Refer to page 22.)
• If 4-digit-language code appears in the audio menu,
refer to page 40.
• If the disc has no audio language, “Not Available” will
be displayed on the TV screen.
Setting the BD Audio Mode
Note
• You can also set “BD Audio Mode” from the setup
menu. Refer to page 28.
• Refer to “Audio signals output from HDMI OUT jack”
on page 33 and “Audio signals output from DIGITAL
OUT (OPTICAL / COAXIAL) jack” on page 34 for how
BD Audio will be output.
• In “Mix Audio Output” mode, if there is no secondary
and interactive audio, the audio will be output as
“HD Audio Output” mode.
E5RJ0BD_EN.book Page 26 Tuesday, October 20, 2009 3:53 PM