Toshiba NB100 - Manual (Page 77)

User’s Manual 7-4
BIOS Setup and Passwords
The default setting is [Disabled]. Changing the setting to [Enabled] enables
the use of this function.
There are two modes, Mode1 and Mode2 in [Enabled]. For normal use, set
the setting to Mode1.
LAN
Wake-up on LAN
This feature lets the computer’s power be turned on when it receives a
wake-up signal from the LAN.
Metal paper clips or hair pins/clips will generate heat if they come into
contact with USB ports. Do not allow USB ports to come into contact with
metal products, for example when carrying the computer in your bag.
If the function does not work with Mode1 setting, change it to Mode2.
Some external devices may not be able to use this function in either mode.
When this happens, change the setting to [Disabled].
Enabled (Mode 1) Enabled (Mode 1)
Enabled (Mode 2) Enables USB Sleep and Charge function.
Disabled Disables USB Sleep and Charge function
(Default).
Enabled Enables the Wake-up on LAN.(Default)
Disabled Disables the Wake-up on LAN.
Do not install or remove an optional memory module while Wake-up on
LAN is enabled.
Wake-up on LAN does not work without the AC adaptor. Leave it
connected, if you are using this feature.