Toshiba VL963 User Manual

Page 53

Advertising
background image

53

CONTROLS AND FEATURES

Engl

ish

d

Press

B or b to select One Touch Recording Time.

e

Press

C or c to select the recording time.

You can set the Programme End Time in 30-minute
increments in the range of 30 minutes to 360 minutes.

To select the TimeShift Size

a

In the Recording Setup screen, press

B

or

b

to select

TimeSift Size.

b

Press

C

or

c

to select 512MB, 1GB, 2GB or 4GB and

press OK.

To use TimeShift recording

Time Shift recording allows you to pause live TV for a fixed
period of time.

For Example: If you move away from the TV for a short period,
such as when the phone rings while you are watching TV, you
can easily pause live TV and then continue to view from the
same point in the programme when you return.

a

Press

W

/

w

on the remote control while viewing the

DTV programme.
The screen will switch to a still image and recording
will start automatically.
The recording time is decided by TimeShift Size. If
the TimeShift file size reaches the limit set, then the TV
will continue to be paused, but the recording buffer
will be reset to the beginning.

b

Press

c

(play).

Catch-up viewing will start from where the
programme was paused.

c

Press

v

(stop) to stop the recording.

To set the padding time for programmed
recording start time and end time

a

In the Recording Setup screen, press

B or b to select

Start Padding Time.

b

Press

C or c to select a time.

You can select from None, 3 minutes, 5 minutes, 10
minutes, 15 minutes, 30 minutes, and 45 minutes.

Recording will start at the selected number of
minutes prior to the recording start time.

c

Press

B or b to select End Padding Time.

d

Press

C or c to select a time.

You can select from None, 3 minutes, 5 minutes, 10
minutes, 15 minutes, 30 minutes, and 45 minutes.

Recording will end at the recording end time plus the
selected number of minutes.

To perform a USB HDD operation test

a

In the Recording Setup screen, press

B or b to select

Device Test and press OK.

USB HDD operation test will start.
Wait until the test ends.

NOTE: The results of the device test are only a guide. The
device may not function as shown in the results.

Recording Setup

TimeShift Size

Start Padding Time

None

End Padding Time

None

Device Test

Format Device

512 MB

Programme End Time

Select Device

One Touch Recording Time

Advertising