Common interface, Software upgrade and licences, Searching for new software – Toshiba VL963 User Manual

Page 72: Network upgrade, Software licences

Advertising
background image

72

CONTROLS AND FEATURES

En

glis

h

The Common Interface Slot, situated on the side of the television,

enables the insertion of a CAM (Conditional Access Module) and

card. These are purchased from a service provider and allow

additional subscription broadcasts to be viewed. For

information, see a service provider.

a

Insert the CAM and card into the Common Interface
Slot, following the instructions provided with the
CAM. A box will appear on screen to confirm that the
CAM has been inserted.

b

Press MENU /

C c

to highlight Setup icon.

c

Press

B

/

C

c

to highlight System Setup icon and

press OK.

d

Press

B

or

b

to select DTV Settings and press OK.

e

Press

B

or

b

to select Common Interface and press

OK.

f

Details of the CAM should now be available.

NOTE:
• Software update of a CI Plus CAM may occur automatically

if instigated by the broadcaster. This could cause the
cancellation of any Reminders/Recordings during this
process.

• Some CI or CI+ CAM may not be supported.

• CI+ operation is not guaranteed except for Canal Ready DTT

services on suffix FC models.

Software Upgrade and Licences

If preferred, software upgrades can be searched for manually

using Search for New Software.

a

In the System Setup menu, press

B

or

b

to select

Software Upgrade and press OK.

b

Press

B

or

b

to select Search for New Software.

c

Press OK. The television will automatically start
searching for a software upgrade, the progress bar
will move along the line.

If an upgrade is found, the television will
automatically start downloading. If not, a screen will
appear stating that an upgrade is unavailable.

TOSHIBA may offer upgrades for the TV’s software in the future.

The TV’s software is upgraded via the Network.

Before downloading software:

Configure your TV to connect to the Internet.

NOTE: While the upgrade is being performed, you will not be
able to watch the TV.

a

In the System Setup menu, press

B or b to select

Software Upgrade and press OK.

b

Press

B or b to select Network Upgrade and press

OK.

NOTE: If the network is not available, a warning
message will appear.

c

The TV software upgrade will start when download
succeeds.

The licences for the software used in this television are available

for viewing.

a

In the System Setup menu, press

B or b to select

Software Licences and press OK.

A screen will appear displaying all the licensing
information required for the televisions software.

Common Interface

Searching for New Software

Network Upgrade

Software Licences

SEARCHING FOR NEW SOFTWARE
Searching for a new software upgrade for this TV.

48 %...

CH 31

Advertising