Toshiba Satellite Pro A120 (PSAC1) - Manual (Page 57)

User’s Manual 3-5
Getting Started
Turning on the power
This section describes how to turn on the power.
The Power button LED indicates the status. Refer to the
Power indicators
section in Chapter 6, Power and Power-Up Modes.
1. Open the computer’s LCD display panel.
2. Press and hold the computer’s power button for two or three seconds.
Turning on the power
Starting up for the first time
The Microsoft Windows Vista™ Startup Screen will be the first screen
displayed when you turn on the power. Follow the on-screen instructions on
each screen in order to properly install the operating system.
■ After you turn on the power for the first time, do not turn it off until you
have set up the operating system. Refer to the section Starting up for
the first time .
■ If the USB floppy disk drive is connected, make sure it is empty. If a
floppy disk is in the drive, press the eject button and remove the floppy
disk.
Power button
When it is displayed, be sure to read the Software License Terms
carefully.