Security, Bluetooth wireless technology – Toshiba Satellite Pro A120 (PSAC1) User Manual

Page 86

Advertising
background image

User’s Manual

4-23

Operating Basics

Wired Equivalent Privacy (WEP) data encryption, based on 128 bit

encryption algorithm.

Wi-Fi Protected Access (WPA).

Advanced Encryption Standard (AES) data encryption.

Wake-up on Wireless LAN (Intel module type)

Security

TOSHIBA strongly recommend that you enable WEP (encryption)

functionality, otherwise your computer will be open to illegal access by

an outsider using a wireless connection. If this occurs, the outsider may

illegally access your system, eavesdrop, or cause the loss or

destruction of stored data.

TOSHIBA is not liable for the loss of data due to eavesdropping or

illegal access through the Wireless LAN and the damage thereof.

Bluetooth wireless technology

Some models in this series are equipped with Bluetooth™ wireless

technology that eliminates the need for cables between electronic devices

such as desktop computers, printers and mobile phones.
You cannot use the built-in Bluetooth functions and an optional Bluetooth

adapter simultaneously.
Bluetooth wireless technology has the following features:

Do not install or remove an optional memory module while Wake-up on

Wireless LAN is enabled.

The Wake-up on Wireless LAN function consumes power even when

the system is off. Leave the AC adaptor connected while using this

feature.

The values shown above are the theoretical maximums for Wireless

LAN standards. The actual values may differ.

The transmission speed over the Wireless LAN, and the distance over

which the Wireless LAN can reach, may vary depending on

surrounding electromagnetic environment, obstacles, access point

design and configuration, client design and software/hardware

configurations. The transmission rate described is the theoretical

maximum speed as specified under the appropriate standard - the

actual transmission speed will be lower than the theoretical maximum

speed.

The Wake-up on Wireless LAN function is effective only when it is

connected with AP. This function becomes invalid when the connection

is cut.

The Wake-up on Wireless LAN function is not available in battery

mode.

Advertising