Toshiba Qosmio F50 - Manual (Page 219)

User’s Manual C-3
Qosmio F50 Series
2.4GHz Band Channels Sets (Wireless IEEE 802.11 Revision b,
g and n draft 2.0)
*1 Factory-set default channels
*2 The approved channels on using are different at each country or region.
When installing Wireless LAN cards, the channel configuration is
managed as follows:
■ For wireless clients that operate in a Wireless LAN Infrastructure, the
Wireless LAN card will automatically start operation at the channel
identified by the Wireless LAN Access Point. When roaming between
different access points the station can dynamically switch to another
channel if required.
■ For Wireless LAN cards installed in wireless clients that operating in a
peer-to-peer mode, the card will use the default channel 10.
■ In a Wireless LAN Access Point, the Wireless LAN card will use the
factory-set default channel (printed in bold), unless the LAN
Administrator selected a different channel when configuring the
Wireless LAN Access Point device.
Frequency Range
Channel ID 2400-2483.5 MHz
1 2412
2 2417
3 2422
4 2427
5 2432
6 2437
7 2442
8 2447
9 2452
10 2457* 1
11 2462
12 2467* 2
13 2472* 2