Toshiba Qosmio F50 - Manual (Page 46)

2-6 User’s Manual
Qosmio F50 Series
Universal Serial Bus
(USB 2.0) ports The Universal Serial Bus port, which complies to
the USB 2.0 standard, is provided on the left
hand side of the computer. The ports with the
icon ( ) has USB Sleep and Charge function.
eSATA/USB combo
port This Universal Serial Bus port, which complies to
the USB 2.0 standard, is provided on the back of
the computer. The ports with the icon ( ) has
USB Sleep and Charge function. This port has
eSATA (External Serial ATA) function.
External monitor
port This port allows you to connect an external
monitor to the computer.
LAN jack This jack lets you connect to a LAN. The adaptor
has built-in support for Ethernet LAN
(10 megabits per second, 10BASE-T),
Fast Ethernet LAN (100 megabits per second,
100BASE-TX) and Gigabit Ethernet LAN
(1000 megabits per second, 1000BASE-T).
The LAN has two indicators. Refer to Chapter 4,
Operating Basics , for details.
■ Do not connect any cable other than a LAN cable to the LAN jack.
It could cause damage or malfunction.
■ Do not connect the LAN cable to a power supply. It could cause
damage or malfunction.
Link indicator
(green) This indicator glows green when the computer is
connected to a LAN and the LAN is functioning
properly.
LAN active indicator
(yellow) This indicator glows yellow when data is being
exchanged between the computer and the LAN.
Modem jack The modem jack allows you use to attach a
modular cable in order to connect the internal
modem directly to a telephone line.
Some models are equipped with a built-in
modem.