Toshiba Camileo P25 - Manual (Page 10)

10
EN
Section 2
Getting Started
Loading the Battery
Before using the camcorder, users must load the Lithium-ion
rechargeable battery come within the package.
1. Insert the battery according to the correct polarity marks (+
or -).
2. Close the battery cover firmly.
Note
• Please take out the battery from the camcorder and remove the
insulator on the battery connection before use.
Inserting and Removing an SD Card (Optional)
The camcorder comes with an internal memory which allows you
to store photos and videos. You can expand the memory capacity
by using an optional SD memory card.
1. Insert the memory card into the slot. Please refer to the figure
on the right side.
2. To remove an installed SD card, press the card inwards to
release it.
3. When the card pops out, gently remove it from its slot.
4. Recommended memory capacity: 1GB or above.
Note
• When a memory card is fitted, videos/photos are saved on the card rather than on the built-in
memory.
• Protecting Data on an SD Card: SD Card is read-
only when it is locked. No photos or videos can be
recorded when the SD card is locked. Make sure the
lock is on the writeable position before recording any
media.
REMOVE
Writeable
position
Write-Protected
Position