Nokia Luna Bluetooth Headset - Manual (Page 5)

Switch the headset on or off
Switch on
Press the headset down to remove it from the cradle. The headset switches on, and
a green indicator light flashes once.
The headset connects to the last connected phone. If you have never paired the
headset with a phone, or you have cleared the pairings, pairing mode is activated.
Switch off
Place the headset in the cradle, and press down on the headset to lock it into place.
The headset switches off, and a red indicator light flashes once. All active calls and
connections are ended.
If not connected to a phone within 30 minutes, the headset switches off.
Tip: Don't have the cradle with you? To switch the headset off, press and hold the
multifunction key for 5 seconds. To switch the headset on, press the multifunction
key.
Wear the headset
The headset comes with different-sized earpads. Select the earpad that fits the best.
To change the earpad, gently pull the current earpad from the earpiece, and push the
new earpad into place.
Gently push the earpiece into your ear.
When you're not using your headset, keep it in the cradle. You can put the cradle in
the carry case and use the handy clip to attach the case to something.
Pair the device
Pair and connect the headset to your phone
Before using the headset, you must pair and connect it to a compatible phone.
You can pair your headset with 8 phones, but you can only connect it to a maximum
of 2 phones at the same time.
With some phones, you may need to make the connection separately after pairing.
When the headset is connected to a phone, the Bluetooth indicator light flashes
slowly.
5