Nokia Luna Bluetooth Headset - Manual (Page 6)

Pair and connect the headset using NFC
With Near Field Communication (NFC), you can pair and connect your headset to your
compatible phone easily.
If the compatible phone supports NFC, activate its NFC feature, remove the headset
from the cradle, and touch the NFC area of the cradle with the NFC area of your phone.
The headset connects to the phone automatically.
You can also disconnect the headset using NFC. For details on NFC, see the user guide
of the phone.
If the phone does not support NFC, pair the headset manually.
Pair the headset manually
1 Make sure your headset is switched off and your compatible phone is on.
2 If you've never paired the headset with a device, or you've cleared the pairings,
switch the headset on.
If you've previously paired your headset with another device, remove the headset
from the cradle, switch the headset off, and press and hold the multifunction key
for 5 seconds.
The headset switches to pairing mode, and a blue indicator light starts to flash
quickly. Follow the voice prompts.
3 Within 3 minutes, switch Bluetooth on in your phone, and search for Bluetooth
devices. For details, see your phone user guide.
4 On your phone, select the headset from the list of found devices.
5 If asked, type in the passcode 0000.
In some devices, you may need to make the connection separately after pairing.
Pair and connect the headset to two phones
When you use the headset for the first time, it automatically pairs and connects to
your phone. You can also connect your headset to another phone, and manage calls
from, for example, both your personal and your work phones at the same time.
6