Nokia 7280 - Manual (Page 24)

C a l l f u n c t i o n s
23
■ Answer or reject a call
• Use the quick slide or press the Call key to answer the call. To mute the
ringing tone, select
Silence .
• To reject the call, press the End key. If Forward if busy is activated in your voice
mailbox, the call is forwarded to your voice mail. If not, the call is rejected.
■ Options during a call
Select Options or press the Upper selection key during a call for some of the
following options: Volume , Mute or Unmute , Contacts , Record , Answer , Decline ,
Hold or Unhold , New call , End call , End all calls .
You might not have all of these options. Contact your service provider for
more details.
• Lock keypad is used to activate the keypad lock.
• Touch tones is used to send tone sequences, for example, passwords or bank
account numbers (network service).
• Swap is used to switch between the active call and the call on hold.
• Transfer calls is used to connect an incoming call or a call on hold with an
active call and to disconnect yourself from both calls.
• Conference is used to call and invite another party into the call (network service).
• Private call is used to have a private conversation with one participant in a
conference call (network service).
• Auto-volume on or Auto-volume off is used to control the earpiece volume
level according to the environment noise level.
• Audio enhancing is used to modify the voice so that it can be heard easily in
noisy environment.
• Number entry is used to enter a number during a call.
• Loudspeaker is used to activate the loudspeaker during a call to have the
hands-free function of your phone.
Note: Do not hold the phone near your ear when the loudspeaker is
in use, because the volume may be extremely loud.
To adjust the volume during a call, select Options > Volume . Rotate the
spinner to the volume level that you want for the call and select OK .
To activate or deactivate the loudspeaker, select Loudspeaker or Handset . The
loudspeaker is automatically deactivated when you end the call or connect
the hands-free unit or headset to the phone.
If you have connected a compatible hands-free unit or the headset to the
phone,
Handset in the options list is replaced with Handsfree or Headset .