Nokia 3600 - Manual (Page 153)

[ 144 ]
3 The user of the sending device selects the desired infrared function to
start data transfer.
To send data via infrared, select Options
→
Send
→
Via infrared in
an application.
If data transfer is not started within two minutes after the activation of
the infrared port, the connection is cancelled and must be started again.
Tip: You can also play phone-to-phone games via infrared.
Example: To send a contact card via infrared: (1) Ask the receiver to
activate the infrared port in his/her device. (2) Go to Contacts, scroll
to a card and select
Options
→
Send
→
Via infrared .
Note: Windows 2000: To be able to use infrared to transfer files between
your Nokia 3600 or Nokia 3650 and a compatible computer, go to
“Control Panel” and select “Wireless Link”. In the “Wireless Link”
“File Transfer” tab check the “Allow others” to send files to your
computer using infrared.
Check the status of the infrared connection
•
When blinks, your phone is trying to connect to the other device
or a connection has been lost.
• When is shown continuously, the infrared connection is active
and your phone is ready to send and receive data via its infrared port.
• CONNECT YOUR PHONE TO A COMPUTER
For further information on how to make a connection to a compatible
computer via infrared or a Bluetooth connection and how to install PC
Suite, see the Installation Guide for PC Suite on the CD-ROM in the
‘Install’ section. For further information on how to use the PC Suite, see
the PC Suite online help.