Nokia 3600 - Manual (Page 45)

[ 36 ]
Minimum settings needed to make a data call
To insert a set of basic GSM data call settings, go to Settings
→
Connection
→
Access points and select Options
→
New access point . Fill in the following:
• Data bearer: GSM data
• Dial-up number: User defined
• Session mode: Permanent
• Data call type: Analog
• Maximum data speed: Automatic
See “Access points” on p. 37 for further information on how to create,
delete, and edit an access point.
High-speed data call (High-Speed Circuit Switched Data, HSCSD)
Glossary: High-speed data enables data transmission rates to
a maximum of 43.2 kb/s, which is three times faster than the
standard data rates of the GSM system. HSCSD is comparable
to the speed of many computer modems that communicate
with today's fixed telephone systems.
For availability and subscription to high-speed data services, please
contact your service provider.
Note: Sending data in HSCSD mode may drain the phone’s battery faster
than normal voice or data calls, as the phone may send data more
frequently to the system.
Tip: The Settings wizard program included in the PC Suite can help you
configure access point and mailbox settings. You can also copy
existing settings, for example, from your computer to your phone.
See the CD-ROM supplied in the sales package.
GPRS PACKET DATA
Glossary: Packet data, or General Packet Radio Service (GPRS),
uses packet data technology where information is sent in short
bursts of data over the mobile system. The benefit of sending data
in packets is that the system is occupied only when sending or
receiving data. Because GPRS uses the system efficiently, it allows
for quick data connection set up and fast data transmission speeds.