Nokia 6236i - Manual (Page 42)

C o n t a c t s
41
3. Enter the new number, or select Search to retrieve a number from the
contacts list; select OK .
4. Enter a name for the entry, and select OK .
Delete 1-touch dialing numbers
1. In the standby mode, select Names > 1-touch dialing .
2. Scroll to the 1-touch dialing location you wish to delete, and select Options >
Delete > Yes .
■ Voice tags
You can dial up to 25 stored numbers using voice dialing.
Before using voice tags, note the following:
• Voice tags are not language-dependent. They are dependent on the
speaker’s voice.
• You must say the name exactly as you said it when you recorded it.
• Voice tags are sensitive to background noise. Record voice tags and use them
in a quiet environment.
• Very short names are not accepted. Use long names and avoid similar names
for different numbers.
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely upon voice dialing in all circumstances.
Assign a voice tag to an entry
Before you can use voice dialing, you must first assign a voice tag to the number.
1. In the standby mode, press the joystick down to view the contacts list.
2. Highlight the contact to which you want to assign a voice tag, and Details >
Options > Add voice tag > Start .
3. Speak clearly into the microphone. Do not select Quit unless you want to cancel
the recording. The device automatically stops recording and saves and replays
the voice tag.
appears next to commands that have voice tags assigned.
If recording is not successful, your device displays Voice system error .
Select Options > Add voice tag , and repeat step 3.