Nokia 6236i - Manual (Page 62)

S e t t i n g s
61
Automatic redial
Occasionally, your network may experience heavy traffic, resulting in a fast busy
signal when you dial. With automatic redial activated, your device redials the
number (number of times is specified by the network), and notifies you once the
network is available.
In the standby mode, select Menu > Settings > Call settings > Automatic redial >
On or Off .
1-touch dialing
You can activate or deactivate 1-touch dialing. In the standby mode, select
Menu > Settings > Call settings > 1-touch dialing > On or Off . See "Set up
1-touch dialing," p. 40.
Calling card
If you use a calling card for long distance calls, you can save the calling card
numbers in your device. Your device can store up to four calling cards. Contact
your calling card company for more information.
Save information
1. In the standby mode, select Menu > Settings > Call settings > Calling card .
2. Enter your lock code, and select OK . See "Change lock code," p. 68.
3. Scroll to one of the four card memory locations, and select Options > Edit >
OK > Dialing sequence .
4. Select one of the following sequence types:
Access no.+ phone no.+ card no. —Dial the 1-800 access number, phone
number, then the card number (plus PIN, if required).
Access no.+ card no.+ phone no. —Dial the 1-800 access number, the card
number (plus PIN, if required), then phone number.
Prefix+ phone no.+ card no. —Dial the prefix (numbers that must precede the
phone number) and phone number you want to dial, then the card number
(plus PIN, if required).
5. Enter the required information (access number or prefix and the card
number), and select OK to confirm your entries.
6. Select Card name , enter the card name, and select OK .