Nokia 6120 classic - Manual (Page 15)

15
To open the list of last dialed numbers, press the call key.
To use the voice commands or voice dialing, press and hold the right selection key.
To change the profile, press the power key, and select a profile.
To start a connection to the web, press and hold 0.
Active standby
When active standby is enabled, you can use the display for fast access to
frequently used applications. To select whether the active standby is shown, select
Menu > Settings > Phone sett. > General > Personalisation > Standby mode >
Active standby > On or Off.
To access active standby applications, scroll to the application, and select it. In
active standby the default applications are shown across the top of the active
standby area, and calendar, to-do, and player events are listed below. To select an
application or event, scroll to it, and select it.
Offline profile
The Offline profile lets you use the phone without connecting it to a network.
When the Offline profile is active, the connection to the wireless network is
turned off, as indicated by
in the signal strength indicator area. All wireless RF
signals to or from your phone are prevented, and you can use your device without
a SIM or USIM card. Use the offline profile in radio sensitive environments—on
board aircraft or in hospitals. You can listen to music using the music player when
the offline profile is active.
To leave the Offline profile, press the power key, and select another profile.
Important: In the offline profile you cannot make or receive any calls, or use other
features that require cellular network coverage. Calls may still be possible to the
official emergency number programmed into your device. To make calls, you must
first activate the phone function by changing profiles. If the device has been
locked, enter the lock code.
■ Indicators
The phone is connected to a UMTS network.
The HSDPA (network service) in UMTS network is activated.
The phone is connected to a GSM network.