Nokia 6120 classic - Manual (Page 74)

74
Factory settings
Reset some of the settings to their original values. You need the lock code. See
“Lock code,” p. 19.
Positioning
With the positioning service you can receive information from service providers
about local issues such as weather and traffic conditions, based on the location of
your device (network service).
To enable a positioning method, select Positioning methods, scroll to the
positioning method, and select Options > Enable. To stop using it, select
Options > Disable.
To define the positioning server access point, select Positioning server > Access
point and the desired access point. Then select Server address, and enter the
domain name or URL address of the server.
Phone
Select Menu > Settings > Phone sett. > Phone and Call, Call divert, Call barring, or
Network.
Call
Send my caller ID (network service)—to set your phone number to be displayed
(Yes) or hidden (No) from the person whom you are calling. The value may be set
by your service provider when you subscribe to the service (Set by network).
Call waiting (network service)—to set the network to notify you of a new incoming
call while you have a call in progress. To request the network to activate call
waiting, select Activate. To request the network to deactivate call waiting, select
Cancel. To check whether the function is active, select Check status.
Reject call with SMS—to enable rejecting phone calls with a text message. See
“Answer or reject a voice call,” p. 23.
Message text—to enter a text to be sent when you reject a call with a text
message
Image in video call—to select a still image to be shown instead of the video when
you deny video sending in a video call
Automatic redial—to set the phone to make a maximum of 10 attempts to
connect the call after an unsuccessful call attempt. Press the end key to stop
automatic redialing.