Nokia 6136 - Manual (Page 53)

C a l l f u n c t i o n s
20
4. Call functions
■ Make a call
1. Enter the phone number, including the area code. To delete an incorrect
character, select Clear .
For international calls, press * twice for the international prefix (the + character
replaces the international access code); and then enter the country code, the
area code without the leading 0, if necessary, and the phone number.
2. To call the number, press the call key.
3. To end the call or to cancel the call attempt, press the end key, or select
Options > End call .
■ 1-touch dialing
Assign a phone number to one of the 1-touch dialing keys, 2 to 9. Call the
number by one of the following ways:
• Press a 1-touch dialing key, and then press the call key.
• If 1-touch dialing is set to On , press and hold a 1-touch dialing key until the
call is started. See 1-touch dialing in ”Call,” p. 49.
■ Enhanced voice dialing
You can make a phone call by saying the name that is saved in the contact list of
the phone. A voice command is added automatically to all entries in the contact
list of the phone.
Make a voice dialing call
If an application is sending or receiving data using a packet data connection, end
the application before you use voice dialing.
Voice commands are language-dependent. To set the language, see Voice
playback language in ”Phone,” p. 50.
Note: Using voice tags may be difficult in a noisy environment or during
an emergency, so you should not rely solely upon voice dialing in all
circumstances.
1. In the standby mode, press and hold the right selection key. A short tone is
played, and Speak now is displayed.
If you are using a compatible headset with the headset key, press and hold
the headset key to start the voice dialing.