Nokia N90 - Manual (Page 102)

Tools
93
Active standby apps. —To select the application shortcuts
you want to appear in the active standby. This setting is
only available if
Active standby is on.
You can also assign keypad shortcuts for the different
presses of the scroll key, by selecting an application from
the list. The scroll key shortcuts are not available if the
active standby is on.
Operator logo —This setting is visible only if you have
received and saved an operator logo. You can choose if
you want the operator logo to show or not.
Display
Brightness —You can adjust the basic brightness level
of the main display to lighter or darker. However, in
extreme light conditions, the brightness of the display
is automatically adjusted.
Power saver time-out —The power saver on the main
display is activated when the timeout period is over.
Light time-out —Select a time-out after which the
backlight of the main display is switched off.
Call settings
Send my caller ID ( )—You can set your phone number
to be displayed to ( Yes ) or hidden from ( No ) the person to
whom you are calling, or the value may be set by your
network operator or service provider when you make a
subscription (
Set by network ).
Call waiting ( )—If you have activated call waiting, the
network notifies you of a new incoming call while you
have a call in progress. Select
Activate to request the
network to activate call waiting, Cancel to request the
network to deactivate call waiting, or Check status to
check if the function is active or not.
Reject call with SMS —Select Yes to send a text message
to a caller informing why you could not answer the call.
See “Answer or decline a call‚" p. 22.
Message text —Write a text to be sent in a text message
when you reject a call.
Image in video call —You can deny video sending when
you receive a video call. Select a still image to be displayed
instead of video.
Automatic redial —Select On , and your phone makes a
maximum of ten attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialling,
press .
Summary after call —Activate this setting if you want the
phone to briefly display the approximate duration of the
last call.
1-touch dialing —Select On , and the numbers assigned
to the speed dialling keys ( - ) can be dialled by
pressing and holding the key. See also “Speed dial a phone
number‚" p. 17.