Voice commands, Add a voice command to an application – Nokia 6620 User Manual
Page 82
Nokia 6620 User Guide
71
Copyright © 2004 Nokia
Tools and applications
If the phone memory is getting full, remove some files, or move them to the
memory card. See "Troubleshooting" on page 103.
• VOICE COMMANDS
Select Menu > Tools > Voice com.
Options in Voice commands are
Add voice command
,
Open
,
New
application
,
Playback
,
Change
,
Delete
,
Delete all
,
Help
, and
Exit
.
You can use voice commands to start applications and profiles, and to dial numbers
from Contacts, without having to look at the phone display. You record a word, or
words, (voice command) and then say this voice command to open an application,
activate a profile, or dial a number.
You can have only one voice command per item. Any spoken words can be a
voice command.
When recording, hold the phone at a short distance away from your mouth. After the
starting tone, say clearly the word, or words, you want to record as a voice command.
Voice commands have the same requirements as voice tags. Before recording a
voice command, see “Requirements for voice tags” on page 27.
Note: You must say the voice command exactly as you said it when you
recorded it. This may be difficult in, for example, a noisy environment or
during an emergency, so you should not rely solely upon voice commands
in all circumstances.
Add a voice command to an application
To add a voice command to a profile, the Profiles folder must be opened and a
specific profile selected.
1
In Voice commands, scroll to the application to
which you want to add a voice command, and
select Options > Add voice command.
Press ’Start’, then speak after tone is displayed.
2
Press Start to record a voice command.
The phone sounds a starting tone, and the
note Speak now is displayed.
3
Say the voice command.
The phone will stop recording after approximately
5 seconds. After recording, the phone plays the
recorded command. Voice command saved is
displayed, and a beep sounds. A symbol
can
be seen next to the application.
If you do not want to save the recording, press Quit before the recording stops.