Nokia 7373 - Manual (Page 20)

C a l l f u n c t i o n s
19
3. Call functions
■ Make a call
1. Enter the phone number, including the area code.
For international calls, press * twice for the international prefix (the + character
replaces the international access code), enter the country code, the area code
without the leading 0, if necessary, and the phone number.
2. To call the number, press the call key.
To adjust the volume in a call, press the volume up or down key.
3. To end the call or to cancel the call attempt, press the end key, or close the phone.
To find a name or phone number that you have saved in Contacts , see "Find a
contact," p. 37. Press the call key to call the number.
To access the list of dialed numbers, press the call key once in the standby mode.
To call the number, select a number or name, and press the call key.
1-touch dialing
Assign a phone number to one of the 1-touch dialing keys, 2 to 9. See "1-touch
dialing," p. 39. Call the number in either of the following ways:
• Press a 1-touch dialing key, then the call key.
• If 1-touch dialing is set to On , press and hold a 1-touch dialing key until the
call begins. See 1-touch dialing in "Call," p. 47.
Enhanced voice dialing
You can make a phone call by saying the name that is saved in the contact list
of the phone. Voice commands are language-dependent. To set the language,
see
Recognition lang. in "Phone," p. 48.
Note: Using voice tags may be difficult in a noisy environment or
during an emergency, so you should not rely solely upon voice dialing
in all circumstances.
1. In the standby mode, press and hold the right selection key, or press and hold
the volume down key. A short tone is played, and Speak now is displayed.
2. Say the voice command clearly. If the voice recognition is successful, a list
with matches is shown. The phone plays the voice command of the match on
the top of the list. If the result is not the correct one, scroll to another entry.
Using voice commands to carry out a selected phone function is similar
to voice dialing. See
Voice commands in "My shortcuts," p. 43.