Black Box ACU2222A - Manual (Page 34)

REMOTE UNIT CONFIGURATION & OPERATION
33
LF too low LF too high
HF too low HF too high
Figure 11 Problems with smearing and sharpness requiring LF and
HF adjustment
6. Identify the ‘slowest’ color – the colored line furthest to the right. Delay the signals of
the two other colors using the following commands:
Delay Command Key Sequence
Increase RED Delay (move right)
Decrease RED Delay (move left)
<R> + <Right Arrow>
<R> + <Left Arrow>
Increase GREEN Delay (move right)
Decrease GREEN Delay (move left)
<G> + <Right Arrow>
<G> + <Left Arrow>
Increase BLUE Delay (move right)
Decrease BLUE Delay (move left)
<B> + <Right Arrow>
<B> + <Left Arrow>
Use the Quick Skew feature to determine which color requires delaying or to quickly set
the delay on a color back to zero. Applying Quick Skew to a color toggles its delay
between zero and 19nS (a typically required value).
Quick Skew Command Key Sequence
Toggle RED Delay <Left Control> + <R>
Toggle GREEN Delay <Left Control> + <G>
Toggle BLUE Delay <Left Control> + <B>