Brother HL-3040CN - Manual (Page 10)

10
Macintosh USB
For USB Interface Cable Users
8 Connect the printer to
your Macintosh and
install the driver
a
Remove the label covering the USB interface
connector.
b
Connect the USB cable to the USB connector
marked with a
symbol, and then connect
the cable to your Macintosh.
c
Make sure the printer power switch is on.
d
Turn on your Macintosh. Put the supplied CD-
ROM into your CD-ROM drive.
e
Double-click the HL3000 icon on your desktop.
Double-click the Start Here icon. Follow the
on-screen instructions.
f
Click Install Printer Driver on the menu
screen.
g
Click USB cable users and follow the
on-screen instructions. Then, restart your
Macintosh.
h
The Brother software will search for the Brother
printer. During this time the following screen
will appear.
i
Choose the printer you wish to connect, and
then click OK.
j
When this screen appears, click OK.
IMPORTANT
• DO NOT connect the printer to a USB port on
a keyboard or a non-powered USB hub.
• Connect the printer directly to your
computer.
Finish
The installation is now
complete.