Introduction, Overview, Se ct io n – Belkin F5D7011 User Manual
Page 7
55
se
ct
io
n
1
2
3
4
5
6
7
8
9
10
Introduction
Product Features
The Card complies with the IEEE 802.11g standard in order to
communicate with other 802.11g-compliant wireless devices at
54Mbps or the faster 125 High-Speed Mode (HSM)*. The card
is compatible with all 802.11g devices as well as other 802.11b
products at 11Mbps. 802.11g products operate on the same 2.4GHz
frequency band as 802.11b Wi-Fi products.
•
2.4GHz ISM (Industrial, Science, and Medical) band operation
•
Integrated easy-to-use Wireless Configuration Utility
•
CardBus interface, for operation in virtually any notebook computer
•
WPA, 64-bit WEP (Wired Equivalent Privacy), or 128-bit encryption
•
Wireless access to networked resources
•
Support for both Infrastructure and Ad-Hoc (peer-to-peer)
networking modes
•
Easy installation and use
•
Internal antenna
•
LED power and network link indicators
Overview
*When operating in High-Speed Mode, this Wi-Fi device may achieve an actual throughput
of up to or greater than 34.1 Mbps, which is the equivalent throughput of a system
following 802.11g protocol and operating at a signaling rate of 125 Mbps. Actual throughput
will vary depending on environmental, operational and other factors.