Belkin F5D7011 - Manual (Page 8)

7 6 7 6
Applications and Advantages
• Wireless roaming with a laptop around the home or office
Offers the freedom of networking without cables
• Connection rates of up to 54Mbps or 125Mbps* using HSM
provides immediate, higher-speed wireless connectivity at home,
work, and hot spot locations without compromising the use of
existing 802.11b products
• Compatibility with 802.11b products
802.11g wireless LAN solutions are backward-compatible with
existing Wi-Fi (IEEE 802.11b) products and with other products
that display the 54g mark and/or 125HSM mark
• Difficult-to-wire environments
Enables networking in buildings with solid or finished walls, or
open areas where wiring is difficult to install
• Frequently changing environments
Adapts easily in offices or environments that frequently rearrange
or change locations
• Temporary LANs for special projects or peak time
Sets up temporary networks, (such as at trade shows, exhibitions
and constructions sites), on a short-term basis; also companies
who need additional workstations for a peak activity period.
• SOHO (Small Office/Home Office) networking needs
Provides the easy and quick, small network installation SOHO
users need.
Product Specifications
Host Interface 32-bit Cardbus
Power Consumption Tx/Rx peak 550/350mA @
3.3 VDC(max)
Operating Temperature 32 –185 degrees F (0 –85 degrees C)
Storage Temperature -40 –194 degrees F (-40 – 90 degrees C)
Humidity (Max. 95% (non-condensing)
Typical Operating Range Up to 200 feet (Wireless performance
may vary depending on the
networking environment)
Overview
*When operating in High-Speed Mode, this Wi-Fi device may achieve an actual throughput
of up to or greater than 34.1 Mbps, which is the equivalent throughput of a system
following 802.11g protocol and operating at a signaling rate of 125 Mbps. Actual throughput
will vary depending on environmental, operational and other factors.