Belkin F5U015-TPW - Manual (Page 6)

Windows ® 98 Installation and Usage
5
WINDOWS ® 98 INSTALLATION:
1. Connect your SCSI device or device chain to the
USB SCSI Adapter. See appendices for adapters and
cables you may need. Make sure that the device(s) are
powered up.
2. Plug in the USB SCSI Adapter to a free USB port on
your computer, or USB Hub. A "New Hardware
Found…" dialog box will appear:
Click on NEXT.
Note: Even if the Adapter is plugged into your USB
port (or Hub), it must first be plugged into a SCSI
device that provides termination power, before
Windows
® will detect and enumerate the
Adapter, and the SCSI device(s). If your SCSI
device(s) does not provide termination power,
make sure the power supply adapter that came
with the package is connected.