Belkin F5U015-TPW - Manual (Page 9)

Appendices
8
Troubleshooting
The SCSI device(s) connected to the USB-SCSI Adapter is
not detected by my computer.
• Make sure the SCSI device(s) are powered up and at
least one device provides termination power necessary
for the Adapter’s operation. If you are just connecting
one device and that device does not have termination
power, make sure the power supply adapter provided
with the package is connected. The SCSI device(s) must
be powered up AND connected to the Adapter prior to
plugging into the USB port.
• If you are using a USB Hub or composite device that
has a built-in hub, make sure that the device is
self-powered, providing the full 500mA of current
required by the Adapter.
• After shutting down your computer, try unplugging then
plugging in the Adapter from the USB port.
• Try unplugging the Adapter, turn the power off and back
on of the SCSI device(s), then plugging the Adapter back
into the USB port.
• Restart your computer with the Adapter connect to the
USB port, and all the SCSI device(s) powered up.