Barco 1280 - Manual (Page 11)

13 12
Preparations
Others
Opreation
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
STANDARD COMPONENTS
Check that the package contains the items listed below.
If any item is missing, immediately contact your dealer.
D-sub 15-pin cable ( × 1)
S-video cable ( × 1)
Video cable ( × 1) Mouse ( × 1)
Power cable ( × 2)
STANDARD COMPONENTS CONNECTIONS
Fluorescent lamp ( × 2 ) (FPL13EX-N)
Manufactured by Matushita Electric Industrial Co., Ltd.
Dust cover ( × 1)
Turn off the
power.
VIDEO S-VIDEO RGB
Screwdriver
Rear of this unit
Video cable
(supplied)
to the video
input
S-video cable
(supplied)
to the
S-video
input
D-sub 15-pin
cable (supplied)
to the
15-pin connector
Monitor Projector
: Signal flow
TV receiver
Using a screwdriver, tighten the screws of the
RGB connector.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Connecting a Projector and Monitor
Before connection, be sure to turn the power to this unit and the device to be connected off.
Depending on the device to be connected, use the RGB connector, S-video connector, or video connector.
Connection via the RGB connector provides detailed and colorful images by RGB output.
User’s manual
The shape of the cable may vary depending on
the country of sale.
**BARCO 012-017(E) 2000.7.18, 8:18 PM 12-13